Hydor H2 Show Crystal Kit
Ships to Canada
Hydor H2 Show Crystal Kit
The Hydor H2 Show Crystal Kit is an elegant way to increase aeration and water flow within your aquarium. Each decoration in the aquarium is hand painted to impart your aquarium a unique and natural look. This unique decoration cleverly hides the compact bubble maker and LED light that provide your aquarium illumination, aeration and of course aesthetic accent. Great for aquarium ranging from 13 to 52 gallons, this kit features a blue LED spotlight that shines through the hand-painted ornament causing it to glow. Turbo-driven Bubble Maker produces a flurry of air bubbles to eliminate stagnant aquarium conditions with refreshing oxygen-rich water movement. The LED light illuminates the streaming air bubbles for a breath-taking aquarium display. The air pump operates silently without disturbing your fish. It is suitable for use in freshwater aquarium and consumes less power as well.
- Creates wonderful effects in your aquarium
- Hand painted ornament hides equipment gives unique look
- Suitable for freshwater aquarium up to 52 gallons
- Simple and easy to install
- Consumes less power without affecting performance
Unwind the electrical cord and the air intake tube.
Connect the air intake tube to the air pump chamber.
Position the air pump in the aquarium. For perfect stability, cover the base with gravel. In order to prevent noise and disturbance caused by vibrations, position the pump so it does not come in contact with the aquarium wall or other objects.
Fix the electrical cord, joined to the air intake tube, to the aquarium base and side using the supplied suction cups. Cut the air intake tube so that it extends at least 1-1/2" from the aquarium frame and then insert air control valve. Plug the Hydor Bubble Maker into the electrical supply.
NOTE: Verify that all components of the air pump are undamaged. Always operate the air pump underwater. Running the pump dry will cause structural damage to the rotor. Install the product at the suggested depth to prevent accidental damage or limited functioning.
Regular cleaning and maintenance of the air pump will ensure better performance and durability. Before any kind of maintenance, always disconnect the air pump.
Detach the light assembly and gently wipe the protective cover.
Separate the Channeled Bubble Maker Casing from the Bubble Maker body and remove the rotor.
Clean the rotor of lime scale with a soft, nonmetallic brush.
Rinse thoroughly with lukewarm water and re-assemble components. Make sure the rotor is properly positioned in place. Do not use solvents or detergents.
4" L x 3.5" W x 5" H
items in your cart
Don't Forget These Accessories