Coralife Dual Day Night Timer

$51.24
ITEM OUR PRICE
Coralife Dual Day Night Timer

$51.24

Buy 2 or more, each at $46.12
Buy 3 or more, each at $45.09

In Stock. Usually Ships 3-6 business days.

Quantity discount will reflect in cart.

Shipping weight = 1.40 lbs.

close

This product may only be purchased with the approval of a veterinarian and may require verification. We will collect any necessary information at checkout and verify a prescription if required.

close

Sometimes, manufacturers require that products be advertised only at their suggested prices. When we choose to sell these items for less, we display the sale price only in the cart. To see the price, click Add to Cart.

Product Summary:

Coralife Dual Day Night Timer

Give your indoor aquarium the best in lighting with this Coralife Dual Day Night Timer which features versatile use, making it perfect for all kinds of tanks. It has an easy to use design and offers an ideal level of programming and controlling of the day/night cycle for indoor aquariums. This timer features a total of 8 outlets. The four outlets are dedicated to ensure constant power, two outlets are committed to night time and the other two to daytime. In addition to this, the timer can automatically switch between the daytime and nighttime outlets. It comes with a 3 feet power cord and a 3 prong plug to eliminate any connectivity trouble. This 24 hour mechanical timer is UL listed and has 15 minute interval settings. It is also designed with sliding outlet safety covers which protect outlets that are not being used.

Features:

  • Versatile use
  • Total of 8 outlets
  • Sliding outlet safety covers
  • 3 feet power cord and 3 prong plug
  • 15 minute interval settings


Item Specification:

Color:
White

Dimensions:
15.5" L x 4.1" W x x 2" H

Weight:
3 Oz

Wattage:
1875

Instructions:
Push up timer-tabs (located at the edges of the timer-dial) toward the center of the dial to turn yellow outlets on and blue outlets off. Push the timer-tabs down to turn blue outlets on and yellow outlets off. Each timer-tab represents a 15-minute interval. The white outlets provide constant power controlled by the on/off switch. The on/off switch controls power to all outlets and the timer.
Setting the timer:
1.Turn the manual control switch to the timer-on position.
2.Set the current time of day by turning the timer-dial clockwise until the correct time faces the arrowhead.
3.Set the times that you want the yellow and blue outlets to turn on and off by using the timer-tabs.
Manual control:
Bypass the timer by using the manual control switch. To activate the yellow outlets continuously, turn the switch to the yellow-on position. To activate the blue outlets continuously, turn the switch to the blue-on position.

Day-night Timer Instructions:
1.Turn the manual control switch to the timer-on position. Set the timer to the current time of day.
2.Pick the time of day you want the daytime lights turned on and push timer-tabs up to turn on yellow outlets for daytime applications.
3.Continue pushing the timer-tabs up until you reach the time of day that you want the daytime lights turned off.
4.When the daytime timer is set, the nighttime timer is automatically set by leaving the remaining timer-tabs down to turn on the blue outlet.
Warning:
Designed for indoor use only. This device should not be installed in wet or damp areas. If installed in a wet or damp area, this device must be plugged into a receptacle controlled by a GFI (ground fault interrupter) circuit breaker. Device must be properly connected to a grounded three-prong receptacle.

Alternating Timer Instructions:
1.Turn the manual control switch to the timer "ON" position. Set the timer to the current time of day.
2.To set the time for when the Actinic Blue outlets (actinic cycle) will turn on, the timer tabs must be in the down position at the desired starting time.
3.Continue around the timer dial in the sequential order (verifying that all the tabs in the actinic cycle are in the down position) until reaching the end of the cycle where the Actinic Blue outlets will be turned off.
4.Push up the timer tabs at the end of the desired actinic cycle to turn on the Lunar Light outlets.
5.Continue pushing the tabs up until reaching the starting time of the actinic cycle.
Note: Actinic Blue and Lunar Light outlets alternate power. Both outlets cannot be on at the same time (i.e. when Lunar Light outlets are on, the Actinic Blue outlets are off).

Day-shift Timer Instructions:
1.Turn the manual control switch to the timer "ON" position. Set the timer to the current time of day.
2.To set the timer for when the 10,000K Daylight outlets day-shift cycle) will turn on, the timer tabs must be in the down position at the desired starting time.
3.Continue around the timer dial in the sequential order (verifying that all the tabs in the day-shift cycle are in the down position) until reaching the end of the cycle where the 10,000K Daylight outlets will be turned off.
4.Push up the timer tabs at the end of the desired day-shift cycle to turn off the 10,000K Daylight outlets.
5.Continue pushing the tabs up until reaching the starting time of the day-shift cycle.
Note: Each timer tab represents a 15-minute interval.

Wave-Maker Timer Instructions:
1.Turn the manual control switch on the Alternating Timer to the timer "ON" position.
2.Push up every other timer tab to the "UP" position to alternate power between the Actinic Blue outlets and the Lunar Light outlets.
3.Continue around the timer dial until all the timer tabs are interchanged consecutively (1 Up + 1 Down).
Wave-Maker Installation
1.Place up to 4 water pumps in desired locations in the aquarium to create multiple currents.
2.Plug two water pumps into Actinic Blue (blue) outlets and two water pumps into the Lunar Light (black) outlets.
3.Plug Power Center into a grounded three-prong receptacle controlled by a GFI (Ground Fault Interrupter) circuit breaker.
4.Turn on the Power Center On/Off switch (red light is visible when power is ON).
Digital Power Center Instructions
Safety Feature: Slide out Safety Cover before using unit.

Battery Installation:
1.Remove Battery Cover from back of timer.
2.Remove Battery Seal and reinstall battery ("AG13" Mercury Battery).
3.Replace Battery Cover onto the Power Center. Note: Battery will activate Display screen and start clock automatically.
4.Plug Power Center into a grounded three-pronged receptacle controlled by a GFCI.
5.Turn on Power Center ON/OFF switch (red light is visible when power in on). Note: Battery serves as a backup power for timer setting, Replace battery every 9 months.
Timer Setting for the Digital Power Center
Time Cycle ON/OFF Yellow (daytime) and Blue (nighttime) outlets alternate power, both outlets cannot be on at the same time. When Yellow (daytime) outlets are on, the Blue (nighttime) outlets are off. When the Yellow (daytime) outlets turn off, the Blue (nighttime) outlets are switched on automatically.

Setting Day and Time:
1.Hold down the "CLK" (clock) button and press:
2.DAY button to set the day of the week.
3.HOUR and MIN buttons to set the current time of day.
Setting Timers
Time Cycle ON/OFF
Note: Yellow (daytime) and Blue (nighttime) outlets alternate power. Both outlets cannot be ON at the same time. When Yellow (daytime) outlets are ON, the Blue (nighttime) outlets are OFF. The Blue (nighttime) outlets are switched ON automatically.

Timer Setting:
Press PRG button once. Yellow (daytime) outlets are ON.
Press DAY button repeatedly and select desired day(s) the Yellow (daytime) outlets will be turned ON. For example:
Every Day: MO TU WE TH FR SA SU
Single Day: WE
Weekdays: MO TU WE TH FR
Weekends: SA SU
Press HOUR and MIN buttons to set the time of day that t he Yellow (daytime) outlets are turned ON.
Press PRG button once. Yellow (daytime) outlets OFF.
Press DAY Button repeatedly and select desired day(s) that the Yellow (daytime) outlets will turn OFF.
Press HOUR and MIN buttons to set the time of day that the Yellow (daytime) outlets will turn OFF.
To set time cycle, repeat timer setting (Steps 1-6).
When timer settings are complete, press CLK button to exit timer setting program and return to clock display.
Review/Edit Timer Settings

Press the PRG button to check and display timer settings.
To change a Time Cycle Setting, press PRG button to display the incorrect time and press DAY, HOUR, and MIN to edit.
When settings are complete, press CLK button to exit timer setting program and return to clock display.
Deleting Timer Setting

Press the PRG Button to Check and display timer settings.
Locate the time cycle to be deleted.
Hold MODE button down and press PRG button to clear the time cycle.

Troublingshooting:
Problem: Daytime light do not turn on.

NOTE: If present time is past the desired daytime cycle "ON" setting, let the power center cycle for 24 hours.

 

Make sure the correct time & day is set on LCD display.

Confirm that the timer is set to desired time and day when daytime lights will turn on and off.

Verify that the mode is set to "Auto."

Ensure that the digital power center plug is connected to a power source.

Make sure that the digital power center switch is in the ON position (red switch light is lit)

Make certain that the fixture is plugged into the power center and fixture switch is in the on position.

Problem: LCD screen power shuts down when unplugged.

NOTE: Battery serves only as back-up for timer setting. Make sure that the digital power center is plugged into a power source and switch is in the ON position to provide power to light fixture(s).

 

Make sure to remove battery seal from the power center.

Verify that the battery is properly oriented in the correct position.

Battery must have become dislodged and must be repositioned.

Battery may have expired. Replace battery.

Customers Also Bought:

Product Reviews by Customers