Brightwell Xport-NO3 Media

$34.99

Today's savings: 0%
SIZE OUR PRICE
300GM

$34.99

Buy 2 or more, each at $31.49
Buy 3 or more, each at $30.79
Buy 6 or more, each at $29.74

In Stock. Usually Ships 3-6 business days.

Quantity discount will reflect in cart.

Shipping weight = 0.70 lb.

close

Sometimes, manufacturers require that products be advertised only at their suggested prices. When we choose to sell these items for less, we display the sale price only in the cart. To see the price, click Add to Cart.

Product Summary:

Brightwell Xport-NO3 Media

The Brightwell Xport-NO3 Media has a high surface area and open structure that ensures superior filtration efficiency and flow through characteristics. With this media, you do not need to change water in the aquarium simply for the sake of decreasing the level of nitrate in the system. Offering optimum results, this media can be used even in very heavily stocked systems for quickly removing nitrate in the water. With this media, you can create an ultra activated material which has the ability to outperform standard denitrification media by more than 300%. It also offers a high efficiency relative in comparison to conventional media results when used in smaller space requirements for equal denitrification.

Features:

  • Ensures superior filtration efficiency
  • Flow through characteristics
  • Can be used in very heavily stocked systems
  • Outperforms standard denitrification media by more than 300%
  • Creates an ultra activated material


Item Specification:

Size:
300 Gm

1000 Gm

Instructions:
Read all instructions before use. The use of a mechanical pre-filter to remove particulate organic material from water prior to its interaction with this media will improve efficiency. Rinse Xport-NO3 in purified water or low-TDS fresh water, then place media into a clean pail and fill with water from the aquarium into which the media is to be placed. Seed each 150 g of Xport-NO3 used with 20-ml of MicroBacter7 (poured into the pail and dispersed by hand), then allow media to remain in this "bath" for 24-hours at room temperature. Remove Xport-NO3 from pail and pour water into the aquarium system, then place Xport-NO3 into canister filter, media reactor, or 800µm mesh filter bag; a flow-through rate of 1 - 3x the total aquarium volume per hour is recommended. Do not fluidize. In systems with an initial [NO3] of <40 ppm, begin with a ratio of 150 g Xport-NO3 per 120 US-gallons (454 L) in system (increase this mass by 10% for every 10 ppm NO3 in excess of 40 ppm). Denitrification will typically begin within one week; rate of denitrification increases with time. If corals or other invertebrates appear to react negatively to the use of Xport-NO3, it may be an indication that NO3 is being removed too aggressively; decrease amount of Xport-NO3 used by 50% and continue use until [NO3] falls within desired range.

 Note that the required amount of Xport-NO3 will change as the system matures, and as biomass and/or stocking density changes. Denitrification relies on adequate organic carbon availability; if [NO3] stops decreasing during the first month of use and no significant increase in bioload, stocking density, or nutrient input rate has occurred during this period, then it is likely that organic carbon or phosphate is limiting. Use of Katalyst, Reef BioFuel, or FlorinAxis (planted aquaria) per the instructions on the respective labels will be required to provide this carbon; NeoPhos or Florin-P will provide phosphorus. Replace ~25% of the total Xport-NO3 employed every 3 - 4 months in high-bioload systems, and every 6 - 8 months in low-nutrient systems. Maximum rate of denitrification is achieved by placing Xport-NO3 in-line with, and downstream from, Xport-BIO. Xport-PO4 may be used downstream from Xport-NO3 to facilitate complete phosphate uptake; do not place Xport-PO4 upstream from Xport-NO3, which will inhibit denitrification.

Customers Also Bought:

Product Reviews by Customers

Questions and Answers by TurnTo: